Opacimeter

type: OPABOX

scroll-down-white

OPABOX - The analysis chamber for diesel engines

The OPABOX Autopower verifies the opacity of exhaust emissions from vehicles powered by diesel engines. Its sensors can measure opacity from light and heavy vehicles.
It incorporates the latest generation exhaust gas analysis chamber developed to conform to international standards.

The GASBOX and OPABOX both come with a practical trolley for easy movement. Standard Bluetooth connectivity and the optional Power Pack (external battery pack) make it possible to use both units in a totally wireless way.

More Details

Accessories

  • probe
  • magnetic rev counter RC2
  • technical documentation (manual user, declaration of conformity WE, MID)

RC2

magnetic rev counter

RC2 is the electronic system for measuring engine speed and temperature. With a magnetic case, it can be attached to the bonnet or the side members to run the tests with extreme ease, RC2 features two modes for measuring engine speed: using a microphone and the residual battery capacity signal, or alternatively induction probes and piezo sensors.

Options

  • rev counter and scan tool RC3
  • the ability to test the 5th Nox gas
  • piezoelectric sensor
  • external battery pack

RC3
rev counter and scan tool

The revolutionary RC3 not only keeps engine RPM and temperature under constant control but also serves as an ECU scanning tool. It therefore allows mechanics to perform two types of test using just the one tool.
The RC3 (Revolution Counter 3) interface can read data in three different ways: using an induction clamp with piezoelectric sensors, using a microphone with the residual battery signal, or directly from the OBD socket.
When plugged into the OBD socket to measure engine RPM and temperature, RC3 reads data directly using EOBD protocol, so there is not even any need to open the bonnet.

RC3 can also be used in scan-tool mode; connected to the EOBD socket, it can read the parameters defined by this standard in accordance with new emission control procedures.

GASBOX Autopower

 

ParametersValues
Dimensions460 x 200 x 250 mm
Weight6,5 kg (with trolley 15 kg)
External power supply2 x 12 V 7 A/h lead batteries; Maximum consumption: 80 W
Serial portRS232 standard
Wireless outputBluetooth
SoftwareETS or IDC4E
TechnologyGreen Led diode
Heating timemax.5 minutes
Chamber length200 mm
Temperature75°C

 

RC2

ParametersValues
Processor systemMB90F591 16MHz
External power supply8 ÷ 32 Volt
Wireless connection1.2 Bluetooth technology
Petrol and diesel detection from vehicle battery12VDC and 24VDC Systems management
Petrol analogue detectionInduction pincers
Diesel analogue detectionPiezoelectric pincers
EnvironmentalOperating temperature: -5°C ÷ +40°C
Operating moisture: 10% ÷ 80% without condensation
Storage temperature: -20°C ÷ +60°C
Dimensions125x130x27mm
Weight370g

 

RC3

ParametersValues
Processor systemMB90F591 16MHz
Serial resources1 1.1 USB Connection 1 RS232 standard connection
External power supply8 ÷ 32 Volt
Wireless connection1.2 Bluetooth technology
Petrol and diesel detection from vehicle battery12VDC and 24VDC Systems management
Petrol analogue detectionAmp clamp
Diesel analogue detectionPiezoelectric sensor
EOBD detectionISO9141-2 ISO14230 SAE J1850 PWM SAE J1850 VPW CAN ISO11898
EnvironmentalOperating temperature: -5°C ÷ +40°C
Operating moisture: 10% ÷ 80% without condensation
Storage temperature: -20°C ÷ +60°C
Dimensions155x162x63 mm
Weight800g